RS6 Flight Simulator Overview
Beautifully designed and extremely adjustable
Fast 45-minute assembly
Includes Seat Slider Rails, Oversized Seat Brackets and more
Sliding adjustment on the Yoke Mount and Rudder Mount
Small foot-print to fit well in most small spaces
Sim Racing-Ready!
Trak Racer are proud partners of Alpine F1 team and Airbus Aircraft
Description
TRAK RACER rs6 MOTION-READY FLIGHT COCKPIT
The RS6 MK3 is an entry-level and extremely rigid simulator that has had several upgrades from customer feedback based on the previous popular RS6, the MK2. From 2014 to 2021, the RS6 was globally, the most preferred entry-level racing simulator in the market and now, it’s the preferred entry level Flight Sim. It ticks all of the boxes for a Flight Simulator Rig that assembles in 30-60 minutes. It's Strong, Adjustable, and has an array of genuine Trak Racer add-ons to personalize the cockpit. In the usual Trak Racer way, we gathered customer feedback from over 17,000 RS6 MK1 and MK2 owners to develop the RS6 MK3.
Take to the skies with an official airbus partner!
Trak Racer, a pioneer in building sim racing and flight cockpits since 2008, became the Official and Trusted Simulator Supplier to Alpine F1 and Airbus Aircraft in 2020. Trak Racer simulators are used by Alpine F1 Team and Alpine Academy drivers like Esteban Ocon, Victor Martins (Formula 3) and Caio Collet (Formula 3) and first choice flight simulator for Airbus! Trak Racer is the Official Simulator Supplier to Alpine F1 Team and Airbus Aircraft.
Choose your Configuration
By gathering feedback since 2008, Trak Racer is able to offer as much, or as little as you need. Start small or go "all-out" from the beginning - we've got your back.
Bring Your Own Seat
We include Genuine Trak Racer Seat Brackets with your frame for a Side-Mounted Bucket Seats or add the optional office chairs / vehicle-style recline seat brackets.
Add a Trak Racer Seat
Since 2008 we have learnt a lot about simulation comfort, particularly for endurance. We present you with a range of Premium, Flight Simulator-specific seating options.
Add a Monitor Stand
The Trak Racer RS6 Flight Edition is rigid, affordable and ready for either a single, triple, dual or quad monitor stand.
TRAK RACER RS6 FLIGHT UPGRADES
Your Feedback Is Our Creation
LEFT AND RIGHT-SIDE MOUNTS INCLUDED
With all the adjustment you need for your left and right-side flight controls from any major brand, you’ll be able to hit the skies in absolute comfort.
Secure and Adjustable
If you’re a serious flight sim operator, then you have a flight yoke. Mount it up directly onto the yoke platform on the Trak Racer rig and adjust as required into the most comfortable position.
Rigidity and Fine-tune Adjustment
Mount your rudders directly onto the pedal baseplate of the simulator and adjust the position on the micro side slider or angle to get it into the perfect position.
DUAL-LOCK SEAT SLIDER KIT INCLUDED
The TR Premium seat slider runner kit will give you quick adjustments of the seat position and lock you in with the least amount of play.
SIM RACING READY
Thinking you might also dabble in Sim Racing?
This kit includes the mounts for you to add on a compatible Wheel, Pedal Set and Gear Shift Mount.
MORE ADJUSTABLE AND STRENGTHENED WHEEL MOUNT
We have added a wheel mount micro-tune slide to the RS6 MK3 to give you forward and back adjustment. We have also strengthened the 2" tube to withstand up to 11nm direct drive steering wheel torque without flex.
MORE ADJUSTABLE AND STRENGTHENED LEFT OR RIGHT SIDE SHIFTER MOUNT
The shifter mount has been strengthened by increasing the thickness of the mount and also the plate on the simulator that it mounts to. We have even added mounting points to enable the shifter mount to move forwards and back.
STRENGTHENED PEDAL PLATE
The RS6 MK3 has been improved to withstand up to 100kgs of braking for force without flex. We have also added pre-drilled mounting points for more new pedal sets on the market and the slide function on the RS6 remains - so you can get those pedals exactly where you need them!
OPTIONAL SINGLE MONITOR STAND
The freestanding monitor stand is an optional extra with height adjustment for the monitor, and also angle up and down adjustment. The complete design has been improved to provide a more rock-solid mount.
Freestanding Triple Stand and Quad Stand also available.Full Gaming Immersion Optional!
Trak Racer offers options for free standing, and integrated display stands for One, Two, Three and Four monitors. Get that immersive experience with the highest quality monitor stands available that have an enormous adjustment range and will stand the test of time.
TR MOTION IS COMING, ARE YOU READY? SIMULATE ALMOST ANY AIRCRAFT OR CAR & TRACK WITH EASE
The Trak Racer RS6 MK3 Pro-Flight is motion-ready, contact us for options and assistance in selecting the best performing and cost-effective motion system. Don’t settle for just moving your seat. Get that whole frame moving!
The RS6 has been designed with experience gained since Trak Racer started in 2008. The base structure is made from 2” steel and powder coated black. The wheel mount has a clever micro-adjustment feature for accurate adjustments as well as angle and height adjustment.
The RS6 supports most Direct Drive Force Feedback wheel systems on the market and of course, is also Belt Drive Wheel Ready. The RS6 is pre-drilled and suitable for all popular flight yokes, controls and rudders as well as sim racing peripherals like steering wheels, pedals and shifters on the market. The Trak Racer accessory range is also constantly evolving to offer a heap of add-on options including speaker mounts, monitor stands, bass shaker mounts, keyboard mounts and more. Designed and Engineered in Australia.
Key Benefits of the RS6 Flight Simulator:- Left and Right-side Flight Control Mounts included
- Yoke, Direct Drive Steering Wheel & Belt Drive Ready!
- Compatible with PC and Console (Xbox and PlayStation for example)
- Compatible with all popular Yokes, Rudders, Flight Controls as well as sim racing steering wheel-bases, pedals and shifters on the market
- Stiffened, Dual-Supported Shaft for a NO FLEX Wheel Mount
- Optional Freestanding Single, Triple or Quad Monitor Stand
- Patented adjustable yoke and steering wheel mount with slide
- Superior build quality, stability and comfort
- Strengthened Left and Right-Side Gear Shift mount with pre-drilled mounting points and slide
- Reinforced Angle and Distance Adjustable Rudder/Pedal Mount, suitable for all the big brands!
- Solid framework with no obstruction between your legs and no additional braces required to strengthen the cockpit
- A wide and firm stance when racing
- Low ground clearance with hard wood rubber floor protectors
- Finished in 2"(51mm) high-grade steel tubing
- The Distance Slider mount allows you to adjust the position of the mounts to the most ergonomic position for you
- Angle Adjustment enabled you to face the shift mount inwards, flat and outwards for customised adjustability.
- Adjustable Design allows you to move forward, back and up/down
- VESA Mounting Bracket for 75mm and 100mm (200mm/300mm/400mm optional)
- Also Available - Triple Monitor Mount and Quad Monitor Mount
- Adjustable Yoke/Wheel Mount Features
- Forward and back micro-adjust sliding mount
- Welded steel frame on the underside of the mount for added strength mount
- Pre-drilled mounting points for all major brand flight rudders and pedals
- The Distance Slider mount allows you to adjust the position of the mount to the most ergonomic position for you
- Angle Adjustment enabled you to face the shift mount inwards, flat and outwards for customised adjustability
- Pre-drilled mounting points for all major brand shifters including Saitek/Logitech, Thrustmaster, Virpil and more
- 2" Industrial Strength Iron Chassis
- 2" Industrial Strength Iron Chassis
- Fully Adjustable Angle Pedal Mount with Distance Slider
- Premium Seat Sliders
- Left/Right Mounting Gear Shifter
- Angle, Slide and Height Adjustable Wheel Mount
- Assembly Instructions
Product Dimensions
OPTIONAL EXTRAS
SEE MORE IN ACCESSORIES!
Caster Wheels with Brake
Sim Rig Mat with RGB Light
Keyboard & Mouse Mount
Triple Monitor Stand
UNIVERSAL BASS SHAKER/TACTILE RIG MOUNT
SHIFTER AND HANDBRAKE COMBO MOUNT
Flight Mount Compatibility
YOKE/HEAVY EQUIPMENT COMPATIBILITY
- Logitech Flight Yoke System (by clamp)
- Logitech Flight Switch/Multi/Instrument Panels
- Logitech Heavy Equipment
- Turtle Beach Velocity One Flight
- Honeycomb Aeronautical Alpha Flight Controls (by clamp)
ALSO SIM STEERING WHEEL BASE COMPATIBLIITY
- Trak Racer 13Nm and 20Nm Direct Drive Bases (Coming Q3 2024)
- Thrustmaster T500, T300, T150, TC-PS, TS-XW, TX, 248, T-GT, T80, TMX and T-GT II
- Thrustmaster T818
- Logitech G25, G27, G29, G920, G923, Logitech G PRO
- Fanatec Elite, Clubsport, Podium DD1/DD2, CSL DD , Fanatec GT DD Pro and CSL Elite
- Fanatec Clubsport DD and DD+
- AccuForce V1/V2
- SIMAGIC M10
- Moza R5, R9, R16, R21 DD Wheel Bases
- Simagic Alpha Mini
- Asetek La Prima, Forte and Invicta DD wheel bases
- Cammus 15Nm Direct Drive
Contact us if your product is not listed
ALSO SIM SHIFTER COMPATIBLIITY
- Trak Racer Sequential Shifter Pro (Coming Q4 2023)
- Fanatec ClubSport Shifter, SQ
- Thrustmaster TH8A, RSTSS, TSS+
- Prosim PSL Sequential Shifter
- Heusinkveld SQ Shifter
- Logitech G Shifter
- DSD SQ Shifter
- Jinx Shifter - additional mount required
- Simworx Pro Series - additional mount required
- VNM Simulation Sequential Shifter
- Quaife PSL Sequential V2, Sequential, and H Pattern - additional mount required
- Aiologs SQ Shifter
- BJ Sim Racing Shifter 3.0
- Frex H Pattern
- SIMAGIC DS-8X (requires 2 holes to be drilled larger)
- SIMAGIC Q1S
- SIMAGIC TB-1
- Moza HGP shifter
- Meca Cup Shifter
- TRSS-PRO
- PRO-SIM
- PRO-SIM LITE
- PRO-SIM SEQUENTIAL
Contact us if your product is not listed.
RUDDER/HEAVY EQUIPMENT COMPATIBILITY
- Thrustmaster TPR: Pendular Rudder Pedals
- Thrustmaster T.Flight Rudder Pedals
- Logitech Flight Rudder Pedals
- Logitech Heavy Equipment
- Virpil Ace
ALSO SIM PEDAL COMPATIBLIITY
- Trak Racer Loadcell Pro Pedals (Coming Q4 2023)
- Fanatec CSL Elite Pedals, ClubSport V1/V2/V3 (including Inverted Pedals)
- Thrustmaster T-LCM, T3PA, GT Ed, T3PGT, T3PA PRO add-on and T500, T150 pedals
- Heusinkveld Ultimate/Ultimate+, Sprint and Pro
- Logitech G25, G27, G29, G920, G923, G Pro pedals
- Meca Cup1-2, Meca Cup1-3, Clutch and Base Plate, Meca Cup 1 Evo Hydraulic & LC
- VRS DirectForce Pro Pedals
- HPP PRX 3P, JBV 2/3 Pedal System
- Simagic P2000-S100 Pedal Set
- BJ Sim Racing Steel Series, 1000psi Hydraulic
- DC Sim Racing DC3
- Racewerk S1 Hydraulic Sim Racing Pedals
- Sim Coaches P1-3
- Simtrecs ProPedal GT
- Velazquez Engineering PRO+ Hydraulic
- Simforge Mark-1
- 3DRAP Ngasa
- Protosimtech PT2
- OBP Pro Race V2 Sim Pedal System
- Simworx Pro Series
- WAVE IMPETUS
- Quaife Throttle Pedal and Brake
- Cube Controls Hydraulic SP01
- Venym Pedals
- Moza CRP Pedal set
- Moza SRP Pedal set with and without SRP plate
- JCL Hydraulic Pedals
- Thera Pedals
- Asetek La Prima, Forte and Invicta pedals (plate may require new mounting holes)
- SRP GT/GT-R/Formula/Formula-R (plate may require new mounting holes)
- TRPED-PRO3
- Simgrade pedal plate and VX PEDAL
Contact us if your product is not listed
FLIGHT CONTROLS COMPATIBLITY
Note. Turtle Beach Velocity One Flight fits onto Trak Racer Wheel / Yoke Mounts
Contact us if your product is not listed
What's Included
Left and Right-Side Flight Sim Mounts
Adjustable Steering Wheel, Pedal and Gear Shift Mounts
Seat Slider and Seat Brackets
Rubber Floor Protectors